blafili B3 Bluetooth Music Receiver

Just works, and uses AAC with Apple devices

I've tried a couple of other Bluetooth receivers and this is the first I've found that both says it supports the AAC codec and actually uses it when macOS computers connect to it. (It's also the first I've tried that doesn't pick up a ton of interference from my Keychron Q60 keyboard.) blafili was very responsive when I had pre-purchase questions and the B3 performed exactly as they said it would - I'm very happy with this device. It sounds great and it's very easy to use. I'm listening to it as I type this, streaming ALAC files from Apple Music on my Mac through the B3 and a separate DAC and amp powering planar magnetic headphones. No noise, no interference, clear audio with a well performing codec. I'm a happy listener!

Great for steaming music from iPhone thru older stereo receiver

I use the RCA cables to output to a an older, but good quality stereo receiver. Connecting with Bluetooth to this device from my iPhone, this device works great - better than expected, adding new life to an older, but great sounding, stereo system. The setup and Bluetooth pairing was easy, flawless, up and running very quickly with no surprises or hassles. Volume levels output similar to the FM receiver or from a DVD player, no preamp needed as with some turntables. Range of the Bluetooth connection is good as I walk around a large room with my phone. Nice device, very pleased with the purchase.

Great Product and Customer Service! Plus, ALL THE OUTPUTS!

This is an excellent Bluetooth receiver! Sound quality is perfect, and it has more output options than competitors. I love that you can customize your Bluetooth device name and pin code. I had some trouble getting it connected to my audio interface, and reached out to Blafili and they responded immediately and helped me troubleshoot the problem and I was able to figure out that it was a setting on my interface that was wrong. The B3 unit is working perfectly! I would definitely recommend this product and this company.

Quality !

Great high end DAC for the price. Sound is very similar to my Bluedento and I found out it's the same company !!! They make great DAC's with high quality parts. They have high output volts so you don't have to crank up the volume on your amp. I'm very happy with all of their products. A great DAC at a great price !

Excellent Bluetooth device! Great support!

I got the B3 to allow a Bluetooth connection between an iPad and a mixer in my church's fellowship hall. VERY easy to connect, and wonderful sound. The fact that it had XLR connections built in was a real plus. I wrote the the vendor and asked about putting a password on the B3 and they sent me procedures - it took just a minute or so to do. Very happy with the blafili B3 and the support from the vendor. I'm streaming to my Yamaha DM3-D mixer from an iPad Pro and it sounds great.

A surprisingly useful audio transmitter / receiver

I have been using this around my house for a few months now and it is the type of device every audiophile should have in their 'toolbox'. The ability to just have a 'wireless' RCA connection is fantastic. For example, I have a Denon Amplifier which has 2 zones plugging in the RTX transmitter into the Zone 2 allowed me to share everything connected to the Denon (including a turntable) to my bedroom speakers without worrying about cables (which my wife appreciated). I have attacked a photo to give you an idea.

Overall I great little device to extend your audio around the house.

Excellent Bluetooth DAC

Great Bluetooth DAC product with exceptional sound quality. Has XLR outputs which is a big plus. I use the XLR Output to connect to my Preamp. The sound is detailed and very enjoyable to listen to. Very easy to use and a true Plug and Play device. Bought 2 of these blafili B3 devices direct from their website for my home use: one for bedroom and one for Living Room. I am very happy with the blafili B3. Highly recommended.

This is the best bluetooth DAC for the cost!

I came across this product when searching for a Bluetooth 5.0 receiver that has stereo balanced out. The only choices outside of this price came to be a Denon Professional unit that is very dated and full of complaints, a couple of small mono XLR male only units that are rechargeable, and extremely high cost "audiophile" geared devices. The fact is, this hits all the marks! It features unbalanced L+R RCA, coax, Toslink, and balanced L+R XLR outputs.

The build quality is excellent and simple. The case is a satin black alloy with a composite front and rear panel. The XLR pins and antenna connector are gold plated. The oled screen is simple yet functional. I like that it is crisp, but not overly bright. It easily fits in with your gear while not being obtrusive. There is only one button on the entire unit, and it serves as a power button, un-pair device, and factory reset.

NOTE: This receiver automatically powers on if USB voltage is supplied, thus allowing you to connect it to your receiver's switched outlet or your main power supply.

Upon disassembly, I was delighted to see that this does indeed contain the ESS 9018K2M chip and the Qualcomm QCC5125! Too many false advertisements to not check nowadays. All solder joints look good with no slop.

The included USB and Toslink cable are 3ft. and feel of good quality.

The sound through this device is strong and clear with no perceived distortion. It is very quick to connect with no dropouts while in use.

My final take on this is that is a no-brainer! A good DAC should not "color" sound as it is completely digital. Some may call me incorrect. Fine! Go sit at home and try to find the difference between your $1k unit and this one while sipping brandy by yourself. The rest should take advantage of this excellently built and priced device and keep all of the extra money in your pocket!

Blafili B3 for the win!