✓ Verified purchase on AmazonWorth the money. Works well so far.

Audio Receiver
blafili XLR Bluetooth Audio Receiver
Features
- 2-in-1 wired USB audio and wireless Bluetooth inputs
- Hi-Res Bluetooth audio codecs: aptX HD, aptX LL, aptX, AAC, SBC
- Stereo/Mono: TWS-Enabled
- Long-Lasting Battery: 16H Battery Life
- Plug and Play, Driver-Free
EU/UK orders: import VAT & customs duties are not included in the item price — they are collected by the carrier at delivery.
- 2-year warranty
- 45-day free returns
- Fast local shipping
- Lifetime support

Wireless in,
balanced out.
Balanced XLR output
A single XLR male connector feeds mixers, PA systems and powered speakers a clean line-level signal — no adapters, no DI box required.
Hi-res wireless codecs
aptX HD, aptX LL, aptX, AAC and SBC on board — the connection negotiates the best codec your phone supports.
Two audio inputs
Stream over Bluetooth 5.1, or play from a computer over USB-C (16-bit / 48 kHz USB audio).
All-night battery
Up to 16 hours per charge — and it keeps playing on USB power while charging. TWS pair two units for true-wireless stereo or mono.
Plug into your gear.
| DEVICE | Works | Notes |
|---|---|---|
| Phones, tablets & computers (Bluetooth) | ✓ | Any Bluetooth source with aptX HD, aptX LL, aptX, AAC, SBC |
| USB-C audio from computer | ✓ | USB DAC 16-bit / 48 kHz |
| Powered speakers / amplifiers | ✓ | Line-level output — set amp volume as usual |
| Mixer / PA (balanced input) | ✓ | XLR male line-level output — not a mic level feed |
| Mic inputs with +48V phantom power | △ | Do not engage phantom power on the paired channel; the output is line level |
Nerdy by design.
- Brand
- blafili
- Item dimensions
- 4.57 x 0.98 x 0.98 inches
- Connectivity Technology
- Bluetooth, USB, XLR
- Color
- Black
- Compatible Devices
- Pro Audio Speakers, Tablet, Mixing Consoles, Mixer, DJ controller, PA system, Smartphone
- Bluetooth Profiles
- 5.1, A2DP, AVRCP
- Supported Bluetooth Codecs
- aptX HD, aptX LL, aptX, AAC, SBC
- Audio Inputs
- Bluetooth and USB-C
- Balanced Audio Output
- XLR male ×1
- USB DAC Resolution
- 16-bit / 48 kHz
- Rechargeable Battery
- Built-in lithium-ion 320mAh
- Battery Life (Playback)
- Up to 16 hours
- Recharging Time
- Up to 2 hours
- Bluetooth Range
- Up to 100 feet (30 m)
- USB Charging Cable
- Type-C 5V, 2A( POWER ADAPTER NOT INCLUDED )
- A2DP Frequency Response
- 20 Hz - 20 kHz (ref 1 kHz, ± 3 dB)
- Frequency Band
- 2402 to 2480MHz
- Dimensions
- 117 x 30 x 25 mm
- Weight
- 0.09 lbs / 40 g
Reviewed by the people who listen.
“I noticed no audible degradation compared to a wired XLR connection. The sound remained detailed, clean, and well-defined”
“it’s even cheaper than some XLR cables—making it an affordable and effective solution for many audio setups”
Rated 4.9 by 70 owners.
Review from AmazonExcellent product!! I have two of these and they work perfectly! Almost zero latency and the build quality is great!
✓ Verified purchase on Amazonthis bluetooth work great i am very happy
with it the custumer service is great 👍
I bought this Bluetooth adapter for my studio monitor. It is easy to install and connect. The sound quality and range are amazing. It eliminates tangled wires around the speaker, and makes my studio clean.
I'm a part time DJ and I bought this XLR input so that I could connect my mobile phone using Bluetooth and play songs. Setup and pairing was easy. The sound quality is great and the battery life is long. The output from the XLR to the mixer is loud and clean. I'm glad to have this extra device on my mixer to help me with my productions. 100% love it.
Review from AmazonI use it for interlude music at band gigs! Works great, never had a problem!
This is a fantastic device if you cabling issues ( or if you just want convenient streaming ).
So, since Christmas I had a layout problem with my "Active Bookshelf" speakers (technically I use 2 Rokit Studio Monitors as bookshelf speakers mounted high on 2 bookshelves). But we needed to move the location of my Streamer away from these bookshelves, so suddenly I had run cables which my wife hated.
So I needed a better solution and I came across the blafili XLR and thought it might work as a high quality alternative to cables, specifically because it supports the HD codecs unlike some other bluetooth wireless devices.
I love how two of them act in a TWS mode (like 2 individual earbuds for the left and right channel) and the fact they work on battery power (as well as wired) was super useful as I got it all working well with my 2 Speakers first, then once I was happy with the placement and the sound quality I was getting, I then just added a simple usb charger to keep them powered up.
So that brings me the most important aspect, how does it sound? Well when streaming from the same WiiM Streamer I was previously using via cables it sounded exactly the same, in fact, I ran the same 'room correction' that the WiiM Streamer offers and I got the same result I had previously as shown in the WiiM App. I love how simple it is within the WiiM Ultra to switch to bluetooth for "speaker output" so overall the swap from cables to 2 blafili XLR devices connected to my speakers took less than 10 minutes ( it did take me a few minutes to figure out how to enable TWS - I should have read the manual first ) and I was up and running and my wife was very happy with the result.
I use these Rokit speakers because for their size these speakers have both good bass down to about 50Hz and a nice linear response with excellent mods and decent treble as you should expect from studio reference monitor speakers.
So I believe this is a nice combination to work with the Blafili XLR, a decent active bookshelf speaker and a streamer that supports bluetooth and you have a nice wireless active solution for any awkward to wire location in your house that will sound great. As an added bonus, if I turn off the WiiM Ultra the Blafilli XLR ends up available to stream directly from my iPhone to the speakers, they can appear as Speakers within your bluetooth settings.
I added some photos to give people an idea for what this solution might look like.
So, if cables are a problem and you have some active speakers (or many an Amp with XLR inputs) and you want to turn them into a high quality bluetooth receiver I would definitely recommend the Blaili XLR.
✓ Verified purchase on AmazonI bought one direct in September and have been using on my Mixer via XLR mic in. Works great and has decent receiver range, no clicks and seems to reject interference from my other wireless devices in house. FFWD to today, ordered another one from AMAZON this time due to lightning fast shipping times. I paired the device to my first one and the two devices work very well together so now I have stereo. Not sure you would need two as a street performer with one speaker obviously but at least there is that option to add another one. The Bluetooth sounds great, using as DAC from tablet is fair sounding. I think Bluetooth is the way to go for sound Quality. 14 plus hours runtime. 4.5 stars IMO.
UPDATE..... The range on my pair of XLRs is 100+ feet in an outdoor situation, direct line of sight of coarse. Now that I have cycled the batteries on both devices they will stayed paired to each other for 24 hrs. Very cool
Write a review
Which box fits your rack?
Every blafili unit shares the same DNA — honest specs, a custom broadcast name, real human support. Pick by connection.
| SPEC |
VIEWING
![]() |
![]() |
![]() |
![]() |
|---|---|---|---|---|
| Price | $40.99 |
$109.00 |
$21.99 |
$44.99 |
| Best for | Studios, PA & installers | Hi-fi stacks & home theater | First wireless upgrade for RCA stereos | Guitar amps & PA speakers |
| Bluetooth | 5.1, A2DP, AVRCP | 5.1, A2DP, AVRCP | 5.2, A2DP, AVRCP | 5.1, A2DP, AVRCP |
| Codecs | aptX HD, aptX LL, aptX, AAC, SBC | LDAC, aptX HD, aptX LL, aptX, AAC, SBC | aptX Adaptive, aptX HD, aptX, AAC, SBC | aptX HD, aptX LL, aptX, AAC, SBC |
| Audio I/O | XLR male ×1 | Bluetooth & USB-C | RCA | 1/4 inch TRS male ×1 |
| Power | Up to 16 hours | USB-C powered (5V) — no battery | USB-powered — no battery | Up to 10 hours |
| View | View | View |
Before you ask.
blafili XLR housing is all plastic ?
No, the material of XLR connector enclosure is aluminum.
Does it support aptX LL for low latency ?
Yes, it supports aptX Low Latency for minimal audio delay. blafili XLR utilizes the Qualcomm QCC3034 Bluetooth chipset which delivers superior audio quality with codecs like aptX HD, aptX Low Latency, aptX, AAC and SBC.
How long does a full charge last ?
About 16 hours of playback on a full charge — and it keeps playing on USB power while charging.
Is it compatible with USB-C power delivery ?
Yes, it is compatible with USB-C power delivery. blafili XLR has a USB Type C port for charging via computer USB or wall adapter.
Does the blafili XLR work with phantom power?
The XLR output is a male, line-level feed — it does not need and does not supply phantom power. Do not engage +48V on the receiving channel.
How do I add Bluetooth to my mixer?
Connect the XLR's male output into a mixer line input (or via a DI box into a mic input), pair your phone, and play. USB-C doubles as a wired audio input from a computer.
Does blafili XLR work with Audio-Technica AT-LP60-BT turntable? It pairs but no sound.
Yes — blafili XLR can pair and connect with the AT-LP60-BT. In some cases, the connection may be established in a “Paused” state by default, so audio won’t start automatically.
Solution: After pairing, press Play/Start on the turntable, or press the "PAIR" button on the blafili XLR to resume audio output.
What should I do if I hear a loud pop or click after pausing music?
A firmware update is available to resolve this issue on blafili XLR. If you hear a sudden pop or click shortly after pausing playback, please contact blafili support. We’ll provide the correct firmware and guide you through the update.
Why is my blafili XLR experiencing a continuous reset loop or failing to hold an A2DP connection when pairing with a Chromecast with Google TV (Android 14)?
This issue is typically caused by a known firmware compatibility conflict regarding GATT-over-classic-Bluetooth negotiations during the initial connection handshake with certain Android 14 sources. During this handshake, the legacy Bluetooth stack and BLE/GATT services conflict, leading to a firmware crash and triggering a hardware watchdog reset (which manifests as a rapid USB hub disconnect/reconnect loop).
This is a software-level protocol handling issue and does not indicate a permanent hardware defect. It can be fully resolved by upgrading your blafili XLR to the latest firmware version.





