blafili T6.35 Bluetooth Transmitter

Easy instructions and paired with my Bluetooth headphones as required

This 3/4 inch guitar cable type of connector has a Bluetooth transmitter attached to it. But do not be fooled, this is a high latency Bluetooth connection not made for live performance or anything that requires synchronous timing, such as playing music with a group or for a recording.

Limitation is clearly expressed by the seller in the listing, though so I’ll still give it full marks because it works just fine when you plug it in. It will indeed pair with a Bluetooth device, and when you play notes, they will play through the speaker of the Bluetooth device, just about half a second after you actually hit the note. As long as you’re aware of this limitation, this is a great device for whatever you might need it for.

I have a number of blafili pro audio and Bluetooth products, and figured I'd add this one to the mix.

The device functions as advertised. You plug it into a 1/4" output, turn it on, and pair it with a speaker or other receiving device. It is an easy way to add some versatility to your audio setup. Connectivity is decent, though when using with another blafili receiver sometimes there would be distortion if I walked between the line of sight of the two units. Part of this could be that I have a metal DJ stand with walls that protrude up a bit and may block some of the signal. Someday I'll try an extension cord and get the transmitter up out of the "cage".

Sound quality is decent, and these units all have support for various Bluetooth codecs and modes. One mode is near real time sound, though if you're running it in combination with a wired speaker you may notice the slightest delay - but in a large venue it would be tolerable. It should not be used for live audio, and they say this in the description, so I don't know why people are complaining about that use case.

Annoyingly, you can't really adjust the transmit volume with this thing, and are at the mercy of your mixer or other equipment. Compared to wired outputs, this one is much quieter and you really have to crank up the level to get similar volume.

Overall, this isn't a bad value for adding wireless capability to your setup, though I am concerned about the range and the ability to interrupt the signal across a small room. I'll do more playing with it in the future to figure out if it's my cage/setup or just a limitation of the unit.

The new Blafili T6.35 transmitter is a wonderful device for a multitude of applications. I have used this and their other products with great success on a multitude of applications and venues. I have added a video to help explain the operations, features, and compatibility. The sound quality of these units are on par with other products I have experienced. With a 16-hour battery life, this allows me to place a mixer, amplifier, or any other line output device that accepts a 1/4 inch phono plug and wirelessly transmit to powered speakers, or other amplifiers. The low cost of this device makes it easy to purchase additional products that can expand your connectivity. One other thing to add, the customer support is absolutely the best I have experienced on Amazon.

This Bluetooth transmitter is easy to use and works well for connecting audio gear like mixers or PA systems to Bluetooth speakers.

Setup is straightforward, and pairing is quick once the device is connected. It can stream to two Bluetooth speakers, which is a nice feature for wider sound coverage.

Pros:

Simple setup and pairing
Supports 2 Bluetooth speakers
Works with mixers and PA systems
Compact design

Cons:

Connection can sometimes drop depending on distance/interference
Not ideal for critical professional audio use

Overall:
A solid and practical Bluetooth adapter for basic audio setups. It works well for casual or small events, but reliability may vary in more demanding environments.

This Bluetooth audio transmitter is easy it use.The connectivity capacity is without mention. The sound quality & music playback are good too.

This ended up being a pretty handy little adapter for situations where you want to send audio wirelessly without running cables everywhere.

Setup was straightforward, and I like that it can send audio to two Bluetooth devices at once. Sound quality seemed perfectly fine for casual listening.

Worth noting that the listing is accurate that this isn’t really for live performance, instrument monitoring, recording, or anything where latency matters. There’s enough delay that I wouldn’t use it for that type of application.

For connecting mixers or sending music to Bluetooth speakers though, it does exactly what it’s meant to do and makes setup a lot cleaner.

I bought this mainly to send audio from a mixer to Bluetooth speakers, and for that purpose it works pretty well. It paired quickly, stayed connected, and was easy to set up. The size is convenient too, so it’s easy to throw in a bag for small events or temporary setups.

The important thing is understanding what this product is for. It’s fine for music playback, background audio, and general wireless use, but it is not something I would use for live performance or practicing guitar/bass in real time. Bluetooth delay is still noticeable in those situations. As long as you’re buying it for the right purpose, it’s a useful little transmitter.